The SGDC is a signal conditioner / strain gauge amplifier that measures mV/V signals. 1 or 2 input channels options are available to simultaneously measure the 1 or 2 loadcell signals with a data rate of 100 samples per second. The sensor communicates the measurement to a host via CAN Bus J1939 or NMEA2000, using a standard M12 connector. The SGDC contains a high performance 24 bit analogue to digital converter and a high performance DSP processor. This gives it unrivalled accuracy and stability. It can be programmed/calibrated to emit any type of unit, on any NMEA2000 chanel, at any output rate, by any qualified electronics service.
It is extremely compact and its aluminium casing gives it robustness and IP67 protection, as well as good lightning protection.
The SGDC will be the best associate to your wired loadcells for the most accurate and reliable measuring chain.
.
- 4 References :
> 1 or 2 input channels (mV/V signals)
. SGDC-1-xxx : 1 Channel
. SGDC-2-xxx : 2 Channels
> CAN J1939 or NMEA2000 outputs
. SGDC-y-CAN : J1939 output
. SGDC-y-N2K : NMEA2000 output
- 11-30Vdc supply voltage
- Low power consumption : 70mA supply current
- Up to 100 Hz sampling (up to 4800 Hz for special projects)
- 24 bit ADC
- Selectable 2.5V / 5V Strain gauge supply
- Durable black anodized aluminum housing
- IP 67 rating
- Dimensions (excluding connectors) : L60 x P60 x H22 mm : Weight : 130g
- Standard M12 (NMEA2000) connectors
- Software upgradable via CAN bus
- Signal to noise ratio calculation
- CAN driver ISO 11898 compatible
- CAN interface (2.0A & B)
